Home>Products>MILLING
Purifier MQF
Special rubber bearings are installed on all supporting and swinging points, this achieves a certain degree of controlled movement while at the same time achieves a smooth vibration movement, low noise operation.

Purifier MQF

The machine is made of three mains parts; the machine frame with hood connected to the aspiration filter, two (2) sides' chambers that house the three (3) sieve deck layers and connected to the two (2) bottom sieves trays with movable flaps (16).  
One machine consists of two sides, whereby each side can deal with a different or same stock. The material enters into the machine via a feed inlet, a counter balance gate spreads the material across the entire sieve width, a series of sieve within three (3) decks vibrate, air aspiration causes the material to stratify into coarse, medium, fine semolina, light branny particles are lifted while branny material with adhering endosperm over tails. Material at the head of the machine will be pure and fine, while towards the tail the material becomes less pure and is more contaminated with bran material. The adjustable flaps located under the sieve sieve allow the material to be sent to the correct destination.

Contact Us

Goldengrain Address: China, Zhengzhou, Tongbai, No. 238, No. 2601, Triumphal Arch,, Henan
Phone: +86-371-68631308
68631358
Post :450006
Email: Info@g-grain.com Download: Purifier MQF

Who we are

What we do

News

Pay attention to us

Copyright: Golden Grain Group Co., Ltd. Tel: +86 371 68631308. Email: info@g-grain.com